|

|
|
|
Six Super Boom™ models beat the competition with superior visibility, more
lift capacity, better stability, better durability and better dump height and
reach. Whether you’re a farmer, contractor, landscaper or rental-yard operator, a Super Boom skid steer delivers unmatched
versatility.
|

|
| Model |
 |
SAE Net hp |
 |
SAE Oper. Load, lbs. |
 |
SAE Oper. Wt., lbs. |
 |
Hinge Pin Ht., in. |
 |
Std. Hyd. Flow, gpm |
 |
| L120 |
 |
14.5 |
 |
600 |
 |
2,050 |
 |
93.6 |
 |
8 |
 |
| L125 |
 |
15.5 |
 |
700 |
 |
2,185 |
 |
93.6 |
 |
8 |
 |
| L150 |
 |
36 |
 |
1,350 |
 |
4,500 |
 |
114.3 |
 |
11.6 |
 |
| L160 |
 |
44 |
 |
1,600 |
 |
5,534 |
 |
115.5 |
 |
15.1 |
 |
| L170 |
 |
50 |
 |
1,765 |
 |
5,540 |
 |
115.5 |
 |
17.2 |
 |
| L175 |
 |
56 |
 |
2,000 |
 |
6,230 |
 |
119.7 |
 |
17.2 |
 |
| L180 |
 |
59 |
 |
2,200 |
 |
7,095 |
 |
124.6 |
 |
19.3 |
 |
| L185 |
 |
72 |
 |
2,500 |
 |
7,100 |
 |
124.6 |
 |
19.3 |
 |
| L190 |
 |
74 |
 |
2,800 |
 |
7,755 |
 |
125.6 |
 |
21.9 |
|
Top of Page
|
|
|

|
The unique Super Boom™ design gives you unequaled dump height and reach for
outstanding productivity. And Super Boom’s rock-steady stability provides you
with confidence and security when working on rough or uneven terrain. This
superior stability means you can travel with a full bucket or a large bale—and
not worry about spillage or tipping over.
You can also go forward up steep hills with an empty bucket, and down with
a full one. That’s something you can’t do with competitive models.
|
|
With the patented Super Boom linkage, the higher the lift, the farther
the reach. The Super Boom linkage lifts its payload up and away, providing
excellent reach at maximum height. The Super Boom design also helps keep the
bucket level for less spillback, even with a full load.
|

|
|

|
Super Boom’s unbeatable stability results from a longer wheelbase, low
center of gravity and proper weight distribution. This combination gives you a
safer, more stable ride than any competitive loader.
With Super Boom’s faster ground speeds, you can decrease cycle times and
increase output. Dual-range transmissions with top travel speeds over 12 mph are
optional on the LS180 and standard on the LS190.
|
|
Lower overall height and compact frame allow Super Boom skid steers to
work in confined spaces that many competitive machines could never access.
|

|
|
Maximum safety is an integral part of the Super Boom design and
includes:
-
Starter lockout that prevents the engine from cranking if the
operator’s seatbelt is not buckled.
-
ROPS (rollover protective structure) certified cab that is strong and
reliable.
-
Boom and bucket hydraulics that lock up the instant the seat belt is
unbuckled or if the operator leaves the cab with the engine running.
-
Standard mechanical boom locks—engaged from inside the cab—that
secure the raised boom and protect the operator if the boom must be raised
before exiting the machine.
|
(BACK
TO TOP OF PAGE)
|
|
|

|
We know how much you rely on your equipment. That’s why we’ve engineered and
built Super Boom™ skid steers to be tough and versatile. These machines thrive
on hard work and demanding conditions.
Beefy boom and frame are built stronger so they can handle bigger
loads.
Loader boom pivot pins are twice the diameter of many competitive
machines for more strength and durability.
Powerful, responsive hydraulics and reliable electrical system are
engineered to withstand severe applications.
|
|
Proven New Holland engines are designed to deliver outstanding torque
rise, horsepower and fuel economy. These clean-burning, low-emission engines use
indirect fuel injection on the L140, L150, L160 and L170, and direct
injection on the L180 and L190.
|

|
|
Engines sit in a "north-south" orientation so the hydraulic pumps
connect directly to the engine through a mechanical coupler. This greatly
improves reliability and reduces maintenance since there are no drive belts to
adjust.
Radiator fan pushes air out through the radiator (unlike
competitive machines which pull air in), reducing radiator plugging in extremely
dirty and dusty conditions.
Maintenance-free batteries and gear-reduction starter can fire up your
Super Boom™ at 0 F (-18 C) without a cold-start kit.
Reliable transmission pumps deliver reduced control effort, less noise
and improved high-flow packaging.
The hydraulic motors are coupled directly into double-reduction
gearboxes, reducing stress on the motors.
Auxiliary boom hydraulics are standard on all Super Boom models and
are conveniently controlled by a handle on the right-hand control lever.
Continuous-duty high-flow hydraulics available on the L170, L180 and
L190 provide maximum power hour after hour for a wide range of attachments.
Short axle shafts increase drive train reliability because there’s
less bending load applied to the axle ends.
Cast iron axle housings provide rugged support for tough jobs and
heavy loads.
Axle hubs require minimal lubrication and provide outstanding clamping
strength.
Dual, endless #80 HEXLL final drive chains are arranged in bow-tie
patterns, run in oil for long life and don't use a master link so they're
stronger than ordinary chains.
Chain sprockets float on the axle shafts eliminating time-consuming
chain alignment adjustments.
|
(BACK
TO TOP OF PAGE)
|
|
|

|
The large, roomy Super Boom™ operator platform gives you all-day comfort and
easy operation that leads to increased productivity. Part of the winning design
is best-in-class visibility no matter where you look—to the front, rear, or
either side.
The boom’s low front cross member provides an unobstructed view of the
bucket’s cutting edge.
Metal side screens on the ROPS structure deliver excellent visibility to
each side, while providing an added measure of operator protection.
|
|
Visibility to the rear is outstanding—no frame towers get in your
way—and the large window and low, sloping engine hood provide excellent sight
lines.
Ample legroom and foot room add to your operating comfort.
Strategically placed grab handles and steps make it easy and safe to
enter and exit.
|

|
|
Low-effort, self-neutralizing hand controls and responsive foot controls with
adjustable pedal position make Super Boom skid steers easy to use and reduce
fatigue.
The contoured seat provides comfort and support even while traveling over
the roughest terrain. A suspension seat available for the L160, L170, and L180
provides even greater operator comfort.
State-of-the-art electronic instrument control (EIC) panel is located
directly in front of you. It constantly monitors all operating systems and
alerts you to potential trouble with both visible and audible alarms.
Air conditioning is a dealer-installed option on the L190.
Standard equipment includes a backup alarm, horn, turn signals and an
engine block heater.
A host of accessories and options allows you to custom build a Super Boom operator
station that matches your needs. Choose from a full cab enclosure kit,
window kits, heater/defroster kit, hand controls kit, and more.
|
(BACK
TO TOP OF PAGE)
|
|
|

|
All Super Boom™ routine service points are conveniently located for fast,
simple maintenance—even with the boom down. These skid steers are the most
durable and reliable you’ll find, but if major service repairs are ever needed,
Super Booms are designed to keep downtime to a minimum.
Side panels can be removed easily without tools for excellent service
access to the engine and hydrostatic drives if needed.
|
|
Seat flips up without tools, providing easy access to the engine and
driveline components.
|

|
|

|
Entire boom and cab assembly lift up and forward for unobstructed
engine and transmission access should major service ever be necessary, and do
not require lifting for any routine maintenance operations.
Engine panels and the rear deck can be locked for jobsite security.
|
|
Outstanding long service intervals mean you spend more time on the job
and less time performing maintenance:
-
Standard lubrication interval is a whopping 50 hours, unlike
competitive machines requiring daily lubrication.
-
Engine oil and oil filter only need changing every 300 hours.
-
Hydraulic system and filter only require attention every 600 hours.
|
(BACK
TO TOP OF PAGE)
(BACK
TO TOP OF PAGE)
(BACK
TO TOP OF PAGE)
|
|
|

Home>New Holland Skid Steer
|
Walter G. Coale, Inc. At the corner of Route 22 & 136 Churchville, Harford County, Maryland 21028
(10 minutes from I-95)
|
|
1 800 286 8292 410 838 6363 410 879 1434
(FAX) 410 879 5840 (FAX) 410 838 7199
|
New and Used Equipment - sales@waltergcoale.com Equipment and Engine Parts - parts@waltergcoale.com Customer Service - service@waltergcoale.com
|
Copyright (c) 2003 - 2008 Walter G Coale, Inc. All rights reserved.
|